Lamdamap 15th International Conference & Exhibition
Euspen’s Lamdamap 15th Conference & Exhibition will be held over 2 days (14th – 15th March 2023) and the daily programme is detailed below.
Please note that all times are shown in Greenwich Mean Time (GMT)
Tuesday 14th March 2023
Time (GMT) | Programme |
08:15 – 09:00 | Meeting Registration |
09:00 – 09:10 | Welcome Address by Prof. Andrew Longstaff, University of Huddersfield, UK |
09:10 – 09:20 | Welcome from Local Host – Prof. Conchúr Ó Brádaigh, University of Edinburgh, UK |
09:20 – 09:50 | Keynote One: Soft robotics for hard problems Prof. Adam Stokes, The University of Edinburgh, UK |
09:50 – 10:20 | Keynote Two: Traceable coordinate measurement Prof. Alistair Forbes, Data Science Department, National Physical Laboratory, UK |
10:20 – 10:45 | Coffee & Networking |
10:45 – 11:45
Chair: Andrew Longstaff
| Session 1: Measurement systems for machine evaluation and control (Part 1) 10:45 Two-photon dual-comb LiDAR for industrial applications 11:05 Comparing performance evaluation methods for assessing an industrial robot tracking system 11:25 Automatic determination of robot tool centre point using a scalable network of photogrammetry sensors |
11:45 – 11:55 | Short Break |
11:55 – 12:35
| Session 1: Measurement systems for machine evaluation and control (Part 2) 11:55 Feeling spindle for process force measurement in tool grinding 12:15 Robust coordinate system alignment using high density point clouds from laser line probe |
12:35 – 12:40 | euspen Scholarship Awards |
12:40 – 13:40 | Lunch & Networking |
13:40 – 14:00 | Poster Session P5.01 Simulation of geometrical errors during application of a confocal sensor system for the measurement of large components with high aspect ratios P5.02 Displacement measurement with phosphorescent spherical marker P5.03 Comments related to ISO 15530 for the evaluation of uncertainty in coordinate measurements |
14:00 – 15:00
Chair: Andreas Archenti
| Session 2: Signal processing for manufacturing measurement (Part 1) 14:00 High-speed spindle dynamic error separation technique 14:20 Comparison of discrete Laplacian-Beltrami operators and their applications in surface metrology 14:40 A novel surface denoising approach based on deep learning for freeform structured surface in metrology |
15:00 – 15:30 | Coffee & Networking |
15:30 – 16:10 | Session 2: Signal processing for manufacturing measurement (Part 2) 15:30 Background noise reduction using spectral subtraction for enhanced vibration analysis in precision manufacturing applications 15:50 Evaluation of the uncertainty of coordinate measurements based on the formula for EL,MPE |
16:10 – 16:20 | Commercial Session
|
16:20 – 17:00
Chair: Philip Martin
| Session 3: Evaluation of machine tool errors (Part 1) 16:20 Estimation of volumetric errors of a machining centre fabricated with conformance to geometric tolerances of ISO 10791 series 16:40 Novel in-situ methodology for geometric error characterisation of rotary axis errors on multi-axis machine tool |
17:00 – 17:10 | Short Break |
17:10 – 18:10
| Session 3: Evaluation of machine tool errors (Part 2) 17:10 Feed speed fluctuation in simultaneous five-axis machining using an end mill 17:30 Characterising the thermal state of machine tools using modal analysis and clustering 17:50 Investigation of ripple phenomenon in hybrid grooved aerostatic bearings |
18:40 – 19:00 | Travel to Networking Dinner |
19:00 – 22:00 | Networking Dinner @ Howies, Waterloo Place |
Wednesday 15th March 2023
Time (GMT) | Programme |
09:00 – 09:30 | Keynote Three: James Webb Space Telescope: Unlocking a new window on the universe Dr. Olivia Jones, UK Astronomy Technology Centre, Royal Observatory, UK |
09:30 – 09:55 | State-of-the-Art: Robotic solutions for remote maintenance and quality assurance Luca Rosario Buonocore, CERN, CH |
09:55 – 10:35
Chair: Rebecca Cheung | Session 4: Novel manufacturing techniques (Part 1) 09:55 Hybrid laser and subtractive machining of reaction bonded silicon carbide 10:15 Design criteria, fabrication, and application of high vacuum brazing furnace |
10:35 – 11:05 | Coffee & Networking |
11:05 – 11:25 | Session 4: Novel manufacturing techniques (Part 2) 11:05 In situ Surface Laser polishing of Laser Powder Bed Fusion 316L steel flat specimens |
11:25 – 11:45 | ISO machine tools standards, progress report Simon Fletcher, University of Huddersfield, UK |
11:45 – 12:45
Chair: Nan Yu | Session 5: Improvements to surface processing 11:45 The effect of polishing slurry parameters on the surface finish obtained using a novel compliant polishing technique 12:05 A hybrid approach for simultaneous ultrasonic peening and polishing of direct metal laser sintered Inconel 625 components 12:25 Significant improvement in surface finish of 3D printed parts using pneumatically configurable polishing process |
12:45 – 12:55 | Closing remarks by Prof. Andrew Longstaff, University of Huddersfield, UK |
12:55 – 13:55 | Lunch & Networking |
14:00 | Travel to Tours |