euspen newsroom

907, 2018

euspen Lifetime Achievement Award for Prof. Hendrik van Brussel

By | July 9th, 2018|Tags: , , , , , |

During euspen’s 18th International Conference and Exhibition in Venice, Italy Prof. Em. Hendrik Van Brussel (euspen President 2007-2009) received a Life Time Achievement Award. Lifetime achievement awards are presented at the annual event to engineers and scientists who have made outstanding contributions to the development and growth of one or

907, 2018

Review of euspen’s 18th Annual Conference and Exhibition

By | July 9th, 2018|Tags: , , , , |

Mikroniek 2018-3 - euspen Conference 2018 report Delegates and exhibitors have just returned from Venice, Italy having attended the 18th Annual Conference and Exhibition hosted by the European Society for Precision Engineering and Nanotechnology (euspen). This year the landmark euspen event was held at the striking Venice Terminal Passeggeri (VTP)

1005, 2018

FINAL CHANCE TO REGISTER FOR THE PREMIERE PRECISION ENGINEERING EVENT IN VENICE

By | May 10th, 2018|Tags: , , , , |

In less than a month, the cream of the precision engineering community will be focused on the latest developments and technology solutions in the exciting micro and nano manufacturing sector at euspen’s 18th Annual Conference and Exhibition in Venice, Italy. euspen (the European Society for Precision Engineering and Nanotechnology) will

1502, 2018

LAST BOOTHS AVAILABLE AT EUSPEN’S ANNUAL CONFERENCE AND EXHIBITION

By | February 15th, 2018|Tags: , , , |

The 18th Annual Conference & Exhibition hosted by the European Society for Precision Engineering and Nanotechnology (euspen) will undoubtedly cement its position as the premiere networking forum for the precision engineering community. euspen’s annual event attracts a uniquely high calibre and focussed audience of leading experts from the commercial, academic,

602, 2018

NPL’s 3rd Dimensional X-ray Computed Tomography Conference

By | February 6th, 2018|Tags: , , , , |

(2 - 3 July 2018, Jubilee Conference Centre, University of Nottingham, Nottingham, UK) The National Physical Laboratory’s Dimensional X-ray Computed Tomography (dXCT) conference is an annual conference presenting and disseminating the latest developments in XCT for dimensional measurement and its industrial impact across a variety of applications. The conference is also expected

2501, 2018

Manufacturing Engineering at DTU – New Year Get Together Networking Event

By | January 25th, 2018|

The section of Manufacturing Engineering at DTU - Technical University of Denmark has contributed to euspen with 21 publications including conference papers and contributions to the special interest group meetings. All of the posters and presentations got gathered today organized by Yang Zhang and Guido Tosello for a networking event. It is always a

2501, 2018

European Conference on Nano Films

By | January 25th, 2018|

European Conference on Nano Films 20th -22nd March 2018, Cranfield University, UK Free exhibition space available euspen members are eligible to select the members discounted rate for this event ECNF 2018 will offer a unique opportunity to share some of the latest R&D work in nanofilms. It will truly be

2201, 2018

euspen’s 18th Annual Conference & Exhibition Hosted in Venice, Italy

By | January 22nd, 2018|Tags: , , , , |

The European Society for Precision Engineering and Nanotechnology (euspen) continues to cement its status as the most proactive and prominent society in the vibrant precision engineering sector in Europe, and plans are well advanced for the 18th in its series of Annual conferences and exhibitions, this year to be held

1212, 2017

ECNF 2018 : Abstract Submission Closing Soon

By | December 12th, 2017|Tags: |

Cranfield University are delighted to take over the organisation of the fifth edition of the ECNF in 2018, after the successful edition in Bilbao in 2016, and host this 3-day conference in the U.K. for the first time. Recently, U.K. government representatives stated that although the country is leaving the EU,

512, 2017

With precision training to specialist level: bronze certificate for Frank de Groot of Tegema

By | December 5th, 2017|Tags: , , |

Frank de Groot, senior engineer at Tegema, has been awarded the Bronze ECP2 certificate. He achieved this by following a number of courses that have been certified in the ECP2 programme: the European certified precision engineering course program. ECP2 is a collaboration between the European and the Dutch Association for

2111, 2017

Wim van der Hoek Award 2017 presented to Sam Peerlinck (KU Leuven)

By | November 21st, 2017|Tags: , , , |

First Belgian winner of Dutch design engineering award At the seventeenth edition of the Precision Fair, held on 15 and 16 November in Veldhoven, the Netherlands, DSPE (Dutch Society for Precision Engineering) presented the Wim van der Hoek Award, also known as the Constructors Award, to Sam Peerlinck (KU Leuven,

2111, 2017

If You Can’t Stand The Heat – Get Out to Dresden

By | November 21st, 2017|Tags: , , |

euspen (The European Society for Precision Engineering and Nanotechnology) has announced a joint conference on Thermal Issues in Machine Tools with CRC/TR 96, March 21-23 2018 in Dresden, Germany. As the scale of manufacturing gets smaller, factors that at the macro scale are of no or limited importance become critical.

2410, 2017

Focus on Micro & Nano Manufacturing — Only a Few Places Left

By | October 24th, 2017|

Time is running out to register for the up-coming Special Interest Group (SIG) focussed on Micro and Nano Manufacturing, hosted by euspen at Strathclyde University. The word “dynamic” could have been invented for the area of micro and nano manufacturing. It seems as if every day there are advances in

2109, 2017

Conference Focuses on Thermal Issues in Precision Engineering

By | September 21st, 2017|

Thermal issues have significant effects in many manufacturing scenarios, but become exacerbated and disproportionately important as the focus intensifies on precision and micro applications. Thermal issues in precision machine tools can have a great influence on machining accuracy, and thermal performance of machine tools must be improved to address this

1409, 2017

Conference Focuses on Dimensional Accuracy and Surface Finish in Additive Manufacturing

By | September 14th, 2017|

Additive manufacturing (AM) continues to provoke huge discussion as it fundamentally questions preconceptions about the future of manufacturing. AM is no longer just a prototyping technology, and much of the focus today is on its transition to a viable and cost-effective direct manufacturing technology. With this transition comes an array

1608, 2017

Miniaturisation in Motion + Control Event (UK)

By | August 16th, 2017|

Discover the drivers, challenges and successes of miniaturisation in modern motion system design. This free event is being held at Renishaw Innovation Centre on September 12th, 2017.  Discover the drivers, challenges and successes of miniaturization in modern motion system design. As the world strives to reach new levels of productivity, it's not just the need

1108, 2017

Special Interest Group Meeting on Micro/Nano Manufacturing

By | August 11th, 2017|Tags: |

The word “dynamic” could have been invented for the area of micro and nano manufacturing. It seems as if every day there are advances in fabricating technologies and giant strides in the sophistication of metrology and supporting technologies vital when manufacturing parts or features at such small scale. euspen (the

2106, 2017

Announcement of 2018 International Conference

By | June 21st, 2017|

Venice to Host euspen 18th Annual  Conference & Exhibition The euspen caravans are scheduled to roll into Venice, Italy for the 18th International Conference and Exhibition to be held 4-8  June 2018.  The organisers are excited to bring this prestigious annual event to such an iconic location. Once again, the

2402, 2017

Heidenhain Scholarships

By | February 24th, 2017|

The flagship euspen annual Conference and Exhibition is now established as the largest and most prestigious gathering of industrial and academic professionals in the precision engineering space. euspen’s philosophy is that the key to advancing the development of the precision engineering sector is to bring industry and academia together. Through

1702, 2017

Bronze ECP2 certificate awarded

By | February 17th, 2017|

Precision education at a high level: bronze certificate for Joris Looman (ASML)   Joris Looman, Lead Design Engineer Opto-Mechanics at ASML, has obtained the Bronze ECP2 certificate for courses certified in the ECP2 programme, the European certified precision engineering course programme. ECP2 is a collaboration between the European and Dutch

601, 2017

LAMDAMAP – Exhibiting and Sponsorship Opportunities

By | January 6th, 2017|

On the 15-16 March 2017, euspen (the European Society for Precision Engineering and Nanotechnology) will be hosting the 12th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine, and Machine Tool Performance (LAMDAMAP) at the Renishaw Innovation Centre in the U.K., looking at aspects of metrology when applied to

1809, 2016

Pushing the Limits – Structured and Freeform Surface

By | September 18th, 2016|

Read the September digital issue of Commercial Micro Manufacturing (CMM) magazine. Article by Chris Young, Micro PR and Marketing Features in this issue include Micro in the USA, Laser Processing, Freeform Surfaces and Digital Microscopy. Visit our website for more of the latest micro manufacturing news and views at www.cmmmagazine.com

208, 2016

COLUMN – MICRO MATTERS / JUNE ISSUE

By | August 2nd, 2016|

Upcoming Networking Opportunities Structured and Freeform Surfaces & LAMDAMAP Following its enormously successful annual international conference and exhibition, this year held in Nottingham, U.K. early June, euspen is pleased to announce two more events of critical interest to the precision engineering sector. Structured and Freeform Surfaces The first is a

208, 2016

ACHIEVING SUCCESS IN PRECISION ENGINEERING IN THE MEDICAL SECTOR THROUGH NETWORKING & PARTNERSHIP

By | August 2nd, 2016|

An analysis of euspen’s role in stimulating innovation in precision, micro, and nano manufacturing in the medical device sector. Dishi Phillips, euspen Broadly speaking, the huge global medical device sector is likely to be affected by three key trends in the short to medium term. First, the drive for technology

2104, 2016

Focus on Precision in Biological Sciences

By | April 21st, 2016|

FaBiMed Workshop at euspen’s 16th International Conference & Exhibition (Cranfield, U.K. 21st April 2016.) The European Society for Precision Engineering and Nanotechnology (euspen) is hosting a workshop for working with FaBiMed (Fabrication and Functionalization of BioMedical Microdevices) at its 16th International Conference & Exhibition to be held in Nottingham, U.K.

1408, 2015

euspen’s Tribute to a Pioneer in the Precision Engineering Sector – Jim Bryan

By | August 14th, 2015|

(Cranfield, U.K., 14th August 2015) Sometimes, a particular figure in a certain community is of such an influence that their passing is universally recognized as a massive loss on a personal, intellectual, and industry level. Such is the case with the passing of Jim Bryan, a man of such stature

2607, 2016

Event Review Nottingham 2016

By | July 26th, 2016|

Euspen’s 16th International Conference and Exhibition For many years, the European Society for Precision Engineering and Nanotechnology (euspen) has been organising and hosting an array of events in order to fulfil its central mission — the advancement of the arts, science, and technology of precision engineering, micro engineering, and nanotechnology.

Translate »